Tekmar 360 Mixing Control Manual de usuario descargar pdf (Pagina 15)

Press and release the Item button to advance to the units adjustment. Use the or button to set the

scale to °F or °C.

To exit the ADJUST menu, press and release the Item button to advance to the ESC item. Then either

press the or button, or leave the buttons alone for 20 seconds.

SETPOINT CONTROL

Access the ADJUST menu by pressing and holding simultaneously for 1 second, the Item, and buttons. The display will now

show the word ADJUST in the top right corner.

Press and release the Item button to advance to the OUTDR DSGN adjustment. Press and hold the

button until OFF is displayed.

Press and release the Item button to advance to the MIX TARGET adjustment. Use the or button to select

the desired temperature. The MIX TARGET setting is set to the desired setpoint supply temperature.

Press and release the Item button to advance to the units adjustment. Use the or button to set the

scale to °F or °C.

To exit the ADJUST menu, press and release the Item button to advance to the ESC item. Then either

press the or button, or leave the buttons alone for 20 seconds.

View Menu (1 of 1)

Section

Installer

Advanced

RangeDescriptionDisplay

Current outdoor air temperature as measured by the outdoor

sensor. This is also the default display for the control.

(OUTDR DSGN ≠ OFF)

Current room air temperature as measured by the indoor sensor.

(Indoor Sensor is present)

Current mixed supply water temperature as measured by the

mixing sensor

Target mixed supply is the temperature the control is currently

trying to maintain at the mixing sensor.

Current boiler temperature as measured by the boiler sensor.

(Boiler sensor is present)

-67 to 149°F

(-55 to 65°C)

23 to 113°F

(-5 to 45°C)

---, 14 to 266°F

(---, -10 to 130°C)

14 to 266°F

(-10 to 130°C)

14 to 266°F

(-10 to 130°C)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Tekmar 360 Mixing Control Manual de usuario Pagina 15