Tekmar 521 Programmable Thermostat Installation Manual de usuario descargar pdf (Pagina 20)

20 of 28

A Watts Water Technologies Company

Setup Menu (1 of 2)

Setting Display

ACCESS

Selects the access level of the thermostat, which

determines which menus and items are available.

Access Level: Installer, User Range: Installer or User

Conditions: Only available when switch setting 1 is

set to Unlocked.

Default: Installer

UNITS

Select the temperature units.

Access Level: Installer, User Range: °F or °C

Conditions: Always available. Default: °F

LIGHT

Select when the display back light should operate.

Auto operates the back light for 30 seconds after a

keystroke.

Access Level: Installer, User Range: OFF, AUTO, ON

Conditions: Always available. Default: AUTO

TYPE

Device Type number. Hold the button to view

the software version.

Access Level: Installer, User Range: 521

Conditions: Always available. Default: 521

SENSOR 1

Select the type of auxiliary sensor 1.

Access Level: Installer

Range: NONE, ROOM, FLOR

(floor), OUT (Outdoor)

Conditions: Available when a sensor is automatically

detected on auxiliary sensor 1 input.

Default: FLOR

SENSOR 2

Select the type of auxiliary sensor 2.

Access Level: Installer

Range: NONE, ROOM, FLOR

(floor)

Conditions: Available when a sensor is automatically

detected on auxiliary sensor 2 input.

Default: ROOM

ROOM SENSOR

Select if the built-in room temperature sensor is on

or off.

Room

Access Level: Installer Range: OFF or ON

Conditions: When switch setting 2 is set to 1H or 2H,

an auxiliary sensor must be set to Room or Floor.

When switch setting 2 is set to H/C/F, an auxiliary

sensor must be set to Room.

Default: ON

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comentarios a estos manuales

Sin comentarios

Tekmar 521 Programmable Thermostat Installation Manual de usuario Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Tekmar 521 Programmable Thermostat Installation