Tekmar 363 Universal Reset Control Installation Manual de usuario Pagina 29

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 40
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 28
29 of 40
Copyright © D 363 -12/08
Room Temperature Units (RTUs) 062 and 063
A single RTU may be connected to the Universal Reset Control 363 in order to provide the control with
indoor temperature feedback for the mixing side of the heating system (Refer to Essay E 002). When using
an RTU, several items related to the mixing side of the heating system are no longer available in the controls
User Interface. These items are available only in the RTUs User Interface. Also, the number of items that
are available on the RTU depends on the type of RTU that is connected to the control.
The access level that is to be used by the control.
DIP switch =
Unlock
363 Misc (Miscellaneous) Menu (1 of 1)
˚F, ˚C
Default = °F
OFF, 30 sec, ON
Default =
ON
ADV, INST, USER, LTD
Default = INST
The units of measure that all of the temperatures are to be
displayed in by the control.
The operating mode for the back lighting on the LCD as well
as the time of keypad inactivity until the control automatically
returns to the default display.
BACKLITE = OFF
(
returns after 10 seconds)
BACKLITE = 30 sec
(returns after 30 seconds)
BACKLITE = ON (returns after 90 seconds)
LTD
INST
ADV
Range
Access
Level
DescriptionItem Field
USER
363 RTU View Menu (1 of 1)
Current room air temperature.
RTU SENS = AIR
- - -, 14 to 167˚F
(-10 to 75˚C)
Target room air temperature.
RTU SENS = AIR
- - -, 35 to 100˚F
(2 to 38˚C)
Current outdoor air temperature.
-67 to 149˚F
(-55 to 65˚C)
Current slab (floor) sensor temperature.
REMOTE 3 = SLAB
-58 to 167˚F
(-50 to 75˚C)
••
D3
D3
D3
Section
LTD
INST
ADV
USER
RTU 062
RTU 063
Range
Access
Level
Description
Item Field
ItemMenu
UnOcc 1
°
F
View
Heat
Vista de pagina 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

Comentarios a estos manuales

Sin comentarios