Tekmar 162 Setpoint Control Installation Manual de usuario

Information BrochureChoose controlsto matchapplication1Application BrochureDesign your mechanical applications2Rough InWiringRough-inwiring instructio

© 2007 D 162 - 08/07 10 of 32 ADJUST Menu (2 of 6)Mode Item Field Range Access Description2OFF, 40°F (4.5°C) to Hot Tub MaximumDefault = 95°F (35.0

11 of 32 © 2007 D 162 - 08/07Mode Item Field Range Access Description6 OFF, 40°F (4.5°C) to Pool MaximumDefault = 78°F (25.5°C)LTDUSErInSTADVSET

© 2007 D 162 - 08/07 12 of 32 ADJUST Menu (4 of 6)Mode Item Field Range Access Description1230 to 20:00 min in10 sec incrementsDefault = 0:30ADVMIN

13 of 32 © 2007 D 162 - 08/07ADJUST Menu (5 of 6)Mode Item Field Range Access Description123456OFF, OnDefault = OnInSTADVRELAY 1 PUMP SECTION RS

© 2007 D 162 - 08/07 14 of 32 ADJUST Menu (6 of 6)Mode Item Field Range Access Description12456NONE, ZONE, CTRLDefault = NONEADVWWSD SECTION RSelec

15 of 32 © 2007 D 162 - 08/07Item Field RangeAccessDescriptionUSErInSTADVCURRENT TIME AND DAY SECTION KDisplays the current time and day of the

© 2007 D 162 - 08/07 16 of 32 Item Field RangeAccessDescriptionOcc, Away, PERM 1, PERM Away 2, PERM UnOcc 3, PERM 4, PERM 5, TMPY Occ 6, TMPY 7, TM

17 of 32 © 2007 D 162 - 08/07SCENE Menu (2 of 2) Note: The SCENE menu is not available when the Application Mode is set to Pool (6) SCENE MENUIt

© 2007 D 162 - 08/07 18 of 32 SCHD (Schedule) Menu (2 of 2) SCHEDULE MENU Item Field RangeAccessDescription– –:– – ,12:00 AM to 11:50 PMor– –:– –,0

19 of 32 © 2007 D 162 - 08/07Item Field RangeAccessDescriptionSEC, LTD, USEr,InST, ADVDefault = USErSECLTDUSErInSTADVACCESS LEVEL The access lev

© 2007 D 162 - 08/07 2 of 32 Table of ContentsDIP Switches Table of Contents ...2Display a

© 2007 D 162 - 08/07 20 of 32 Application Mode 1 - On / Off Setpoint SECTION AApplication Mode 1 is a generic setpoint control operation using an

21 of 32 © 2007 D 162 - 08/07Pressing the UP button while in the VIEW menu starts operation of the Hot Tub for the time set.To Stop operation pr

© 2007 D 162 - 08/07 22 of 32 Pressing the UP button while in the VIEW menu starts operation of the Hot Tub for the time set.To Stop operation pres

23 of 32 © 2007 D 162 - 08/07Select the heating or cooling cycle length in minutes for Application Modes 4 (Setpoint), 5 (Floor), and 6 (Pool).

© 2007 D 162 - 08/07 24 of 32 Sensor Input SECTION JThe Setpoint Control 162 requires a temperature sensor (Universal Sensor 071 included) to be c

25 of 32 © 2007 D 162 - 08/074 Event 2 EventOccupied 1 OccupiedUnoccupied 1 UnoccupiedOccupied 2Unoccupied 2ScheduleModeEvent24hrSatSunMonTueWeT

© 2007 D 162 - 08/07 26 of 32 Away Hold SECTION NTo setback the temperature while the occupants are away, use the Permanent Away 2 scene. This sce

27 of 32 © 2007 D 162 - 08/07the occupied period. During the unoccupied periods, the exchange supply water temperature is lowered by the differe

© 2007 D 162 - 08/07 28 of 32 Outdoor TemperatureThe setpoint control can display the outdoor temperature in the View menu when connected to a tN4

29 of 32 © 2007 D 162 - 08/07Error MessagesLocal Errors and Device ErrorsError messages are used to indicate a problem somewhere in the system.

3 of 32 © 2007 D 162 - 08/07DisplayAccess Levels The Access Level restricts the number of Menus, Items and Adjustments that can be accessed by t

© 2007 D 162 - 08/07 30 of 32 Error Messages (1 of 2) Error Message DescriptionADJUST ERRORThe setpoint control failed to read the ADJUST menu se

31 of 32 © 2007 D 162 - 08/07Error Message DescriptionDEVICE LIMITThere are more than 24 devices on the tN4 bus. The additional devices must be

Limited Warranty The liability of tekmar under this war-ranty is limited. The Purchaser, by taking receipt of any tekmar product (“Product”), acknowle

© 2007 D 162 - 08/07 4 of 32 Use the User Interface available on the Liquid Crystal Display (LCD) to setup and monitor the operation of the setpoin

5 of 32 © 2007 D 162 - 08/07LoadThe Setpoint Control 162 is designed to support six different applications. The items shown in the VIEW and ADJU

© 2007 D 162 - 08/07 6 of 32 Applications: Pulse Width ModulationMode 4 Setpoint (PWM)LoadMode 5 FloorMode 6 PoolHeating PWM Operation Warmer Set H

7 of 32 © 2007 D 162 - 08/07VIEW MENUVIEW Menu (1 of 2)Mode Item Field Range Access Description12450:01 to 24:00 hrLTDUSErInSTADVOCCUPIED TIME

© 2007 D 162 - 08/07 8 of 32 VIEW MENUMode Item Field Range Access Description1OFF, -4°F (-20.0°C) to Setpoint Maximum (variable)USErInSTADVSET SET

9 of 32 © 2007 D 162 - 08/07ADJUST MENUADJUST Menu (1 of 6)Mode Item Field Range Access Description1234561, 2, 3, 4, 5, 6Default = 1InSTADVAPPLI